sans objet

sans objet

Multiphysics modeling of crack healing through matter transport

In reactor, the fuel is subjected to various loadings that can induce cracking and affects its mechanicals, physicochemical and transport properties. Thereafter, matter can diffuse inside the crack and clog it, which can restore the material’s rigidity. This phenomenon is commonly referred to as crack healing.Nuclear fuel for sodium fast reactor can be healed by diffusion welding (Salmon et al., 2026) or porosity migration (Barani et al., 2022).

This Ph.D. thesis aims at developing a multiphysics modeling of crack healing based on a coupling between fracture mechanics, matter transport in cracks and local physicochemical process which induce healing. Dedicated numerical method must be extended to couple damage gradient model, crack width and matter transport.

Model validation is a major challenge, notably because of the difficulty of distinguishing and characterizing the various mechanisms at play in irradiated nuclear fuel. To address this challenge, the project will also investigate cementitious materials, for which dedicated experiments on crack healing have been conducted.

This PhD project will be carried out within the MISTRAL Joint Laboratory, bringing together Aix-Marseille University, CNRS, Centrale Marseille and CEA, in collaboration between the IRESNE institute (CEA Cadarache site) and the ISAS institute (CEA Saclay site). The PhD student will be primarily based at Cadarache and will spend a period of 6 months to 1 year at the CEA Saclay site. The student will also benefit from the scientific environment of the Laboratoire de Mécanique et d’Acoustique (LMA). This collaboration aims to develop a generic model applicable to both nuclear fuels and cementitious materials.

The PhD student will showcase his results through publications and participation in conferences. He/she will have gained strong skills in multiphysics coupling, numerical method and numerical simulation, which will be a major asset in several fields, both in academic and industrial sectors.

(Barani et al., 2022) Barani T, Ramière I, Michel B (2022) Analysis of fabrication and crack-induced porosity migration in mixed oxide fuels for sodium fast reactors by the finite element method. J Nucl Mater 558:153341. https://doi.org/10.1016/j.jnucmat.2021.153341
(Salmon et al., 2026) Salmon, L., Blanc, V., Garajeu, M. et al. A thermo-mechanical cohesive zone model for damage and healing in brittle solids. Comput Mech 77, 501–520 (2026). https://doi.org/10.1007/s00466-025-02675-5

Towards an advanced modelisation of actinide oxides through dielectric aware machine-learning potentials

Actinide oxides, such as UO2, PuO2, and their mixed oxide(MOX), are fundational fuel materials for existing and next-generation nuclear reactors where their thermomechanical properties dictate fuel safety and operational performance. These materials are polar ionic crystals, and their dielectric properties therefore play a central role in their physical behavior. For instance, long range electrostatic interactions and dynamical polarizabilities shape the phonon spectrum, control the thermodynamic properties and impact the heat transport of the solids. From a simulation point-of-view, neglecting these effects risks systematic error in the prediction of properties that matter for fuel performance.

This project will develop and apply novel machine-learning atomistic simulation methodologies that explicitly incorporate dielectric properties into the description of actinide oxides, bridging a critical gap between current frameworks and the physic of polar materials.

In the first phase of this work, you will train a machine-learning interatomic potential with explicit long-range electrostatic capability for UO2, PuO2 and MOX. The potential will then be applied in large-scale finite-temperature simulations to quantify the impact of electrostatic interactions on elastic properties, thermal expansion, thermal conductivity and key thermodynamic properties such as heat capacity. The same potential will be used to compute infrared spectra, which are directly sensitive to the dynamic charge response of the material. Comparison with available experimental measurement will serve as an assessment of the accuracy of the atomistic model for actinide oxides.
Building on this framework, the second phase will extend the MLIP architecture to couple explicitly to external electric fields, enabling the direct simulation of polarizability derivatives and Raman-active vibrational modes. This will allow the computation of Raman spectra directly from molecular dynamics, providing a link between spectroscopic signatures and atomic structure.

The results produced at each stage of this project will constitute original contributions to the field and will be disseminated through publications in international peer-reviewed journals and presentations at international scientific conferences.

Beyond its scientific outcomes, the project will provide you with a versatile skill set applicable to many areas of materials science: ab initio electronic-structure calculations, the development of machine-learning interatomic potentials, classical molecular dynamics, and the key concepts of statistical physics and condensed-matter physics. You will also receive training in high-performance computing, with direct access to CEA supercomputing facilities. The supervising team includes recognized experts in all of these fields.
You will join the Fuel Behavior Modeling Laboratory at the Research Institute for Nuclear Systems for Low-Carbon Energy Production (IRESNE, CEA Cadarache), a dynamic research team where you will have regular opportunities to interact with fellow PhD students and researchers. This environment also provides extensive opportunities for national and international collaboration, including with:
• Experimental researchers from the Nuclear Fuel Studies Department,
• Teams from other CEA centers (Saclay, CEA/DAM),
• International partners.

This rich and multidisciplinary context will enable you to fully engage with the scientific community focused on nuclear materials science.
[1] Dubois, E. T., Tranchida, J., Bouchet, J., & Maillet, J. B. (2024). Atomistic simulations of nuclear fuel UO2 with machine learning interatomic potentials. Physical Review Materials, 8(2), 025402.
[2] King, D. S., Kim, D. Zhong, P., & Cheng, B. (2025). Machine learning of charges and long range interactions from energies and forces. Nature Communications 16, 8763.

Multiscale three-dimensional modeling of fine UO2 fuel fragmentation under LOCA conditions

The French Alternative Energies and Atomic Energy Commission (CEA) is a major player in research and innovation in the field of low-carbon energy. In collaboration with EDF and Framatome, it conducts research combining simulation and experimentation to improve the safety of French reactors. The CEA is developing the PLEIADES simulation platform, which models the behavior of nuclear fuel using a multiphysical and multiscale approach.
This thesis focuses on studying the behavior of fuel rods during a hypothetical Loss Of Coolant Accident (LOCA) scenario in a pressurized water reactor. These rods consist of fuel pellets stacked within a zircaloy cladding, which serves as the first containment barrier for radioactive fission products. During a LOCA, the cladding temperature rises, while the internal pressure of the fuel rod exceeds that of the primary coolant system. Due to heat and oxidation, the cladding is weakened, this can lead locally to the cladding ballooning or even its rupture.
The resulting sudden depressurization can lead to the fragmentation of the fuel, which has already been fragmented into several pieces during its operation in the reactor. The fragments may then disperse into the primary coolant loop, altering the core cooling conditions—which constitutes a fundamental safety concern. The objective of this thesis is therefore to quantify the impact of cladding ballooning on fuel fragmentation and relocation, in order to predict its dispersion in the event of cladding rupture and thereby strengthen safety demonstrations.
This thesis work aims to develop a three-dimensional simulation approach for the release of fission products and the fine fragmentation of fuel observed under thermomechanical loads. Particular attention will be paid to the influence of the confinement exerted by the shell on fragmentation mechanisms. To this end, the Discrete Element Method (DEM) will be coupled with Cohesive Zone Models (CZM) to simulate crack propagation in an elementary volume composed of a few grains, under various loading, confinement, and geometric conditions. A multiscale approach will then be used to extend the simulations to fuel pellet scale. Volumes representative of the pellet’s different zones will be studied to gradually build a macroscopic-scale description, using cellular automata and/or full three-dimensional calculations. The models will be evaluated by comparing them with representative experimental data.
The student will be based at the IRESNE Institute (CEA-Cadarache) in the Laboratory of multi-type fuels expertise and performance code validation (LEVA) within the Fuel Study Department (DEC). This doctoral research will be conducted jointly at : 1) LEVA and 2) the Laboratory of Mechanics and Civil Engineering (LMGC, University of Montpellier). The doctoral student will build upon the findings of previous doctoral research as well as the high-performance computational tools ExaDEM and the proven LMGC90 tool. The doctoral student will develop skills at the intersection of mechanics, materials science, and nuclear engineering, within a research environment that combines scientific expertise, academic collaboration, and industrial partnerships. The work may be showcased through publications and presentations at international conferences.

A. Nusslé « Modélisation de la fragmentation fine du combustible UO2 lors d’un Accident de Perte de réfrigérant Primaire », Thèse de doctorat, Université de Montpellier, 2026
V. Richefeu & al., Advanced strategies for discrete simulations with three-dimensional R-shapes in rockable framework. Computer Physics Communications, 320, 109997, 2026.

Experimental characterization of nuclear fuel melting transition using laser heating on equivalent material

Safety studies for Pressurized Water Reactors (PWRs) require demonstrating the absence of fuel melting by maintaining its temperature below the melting threshold in all operating conditions. In this context, the melting behavior of the fuel and the solidus/liquidus temperatures are critical input data. However, the available experimental data, which are limited and outdated, show significant variability, particularly for the solidus temperature, demanding substantial safety margins. As a consequence, the current safety approach ensures the absence of fuel melting by accounting for sufficient power margins, but research aimed at improving the understanding of the underlying mechanisms could pave the way for optimization and operational margin gains.

This PhD thesis has two main objectives: clarifying the impact of fission products on solidus/liquidus temperatures; to finely characterize the microstructural evolution during this transition. To achieve this, the Ph.D. student will develop a high-temperature measurement method (>2700°C) with a thermal gradient on the CEA's laser platforms, in collaboration with the Fresnel Institute. The method must ensure sufficient precision for the unambiguous characterization of solid-liquid phase transition temperatures. Tests will use SIMFUEL samples (fresh UO2 doped to simulate irradiated fuel). A detailed characterization of the samples before and after testing (optical microscopy, SEM, EDX) will provide clear indicators of microstructural evolution. The predesign and interpretation of the experiments will rely on thermochemical calculations to consolidate modeling in support of the understanding the melting behavior of irradiated UO2.

This project, to be carried out at CEA Cadarache within the Institute for Research on Nuclear Systems for Low-Carbon Energy Production (IRESNE) in close collaboration with the Fresnel Institute in Marseille, will provide an opportunity to develop strong expertise in the behavior of composite materials, thermochemistry, as well as high-temperature instrumentation and optics, opening up a wide range of career opportunities in the energy and materials sectors.
1/ D. Manara et al., Journal of Nuclear Materials, 342, 148–163, 2005. DOI : 10.1016/j.jnucmat.2005.04.002.
2/ V. D’Ambrosi et al., Nuclear Technology, 210, 285–307, 2024. DOI : 10.1080/00295450.2023.2253660.

(U, Pu)O2 fuel for 4th generation reactors: the impact of the porosity on the thermal conductivity.

Thermal conductivity is a key property governing the thermomechanical behaviour of nuclear fuels. It depends, in particular, on their microstructure and porosity, which can reach high levels in MOX fuels (mixed uranium and plutonium oxides) used in fast neutron reactors (FNRs).
This PhD aims to understand and quantify the influence of porosity on the thermal conductivity of MOX fuels, with the objective of establishing a predictive law that accounts for pore fraction, size, shape and interconnectivity. The study will build on recent experimental measurements performed at the European Commission’s Joint Research Centre (JRC) in Karlsruhe, at temperatures of up to 2700K, and on comparisons between these measurements and numerical simulations at the microstructural scale.
The PhD will be carried out at CEA Cadarache, within IRESNE, in the Laboratory for Expertise and Validation of Multi-Reactor-Technology Applications (LEVA). The collaboration with the JRC will provide an international scientific environment. The research will lead to scientific publications and conference presentations. It will also provide the opportunity to develop skills in experimental data analysis and numerical modelling, which are transferable to other areas of materials science and engineering.

Thermal conductivity of mixed oxide fuel (MOX): effect of temperature, elementary chemical composition, microstructure and burn-up in reactor, PhD thesis by Plamen Bonev at CEA, DEC/SESC/LEVA (2023), available through the TEL – Thèses en ligne portal.

uantification of the Thermophysical Properties of Molten Salts at High Temperatures: New insight gained of Laser Techniques

Molten-salt reactors are the subject of significant research at the national and international levels, particularly to assess their potential for actinide and nuclear waste management. In this context, the knowledge of corresponding salt properties and their evolution as a function of temperature and composition is crucial. This includes melting point, viscosity, surface tension, density and thermal conductivity quantification in the temperature range of 600-800°C, that require specific and complex experiments for their determination. To overcome the current limitations of measurement techniques and gain new insight into these critical properties we propose to develop an original set of experiments and methodologies relying on laser and optical techniques. Specifically, high power lasers will be used to drive the “salts” at high temperature, and imaging, spectrometry, thermography and pyrometric techniques will be deployed to determine the properties of interest thanks to the great flexibility offered with these optical and laser-based techniques. The proposed approach to reach the objectives goes from the conceptual designs tested in a photonics laboratory to the application in a hot cell laboratory, which is the final targeted point, thanks to a coupled modelling approach [see for example: 1, 2, 3].

The thesis work will be conducted in collaboration between the Fresnel Institute in Marseille and the Institute for Research on Nuclear Systems for Low-Carbon Energy Production (IRESNE) at CEA/Cadarache centre.
The thesis will enable the student to acquire skills in optical instrumentation, laser heating, high-temperature metrology, image processing, and numerical modelling. These skills can be applied in public or industrial research, particularly in the fields of instrumentation, materials, and nuclear energy.
Thesis supervisor (CEA): Y. Pontillon

Reference.
[1] Gabriel Aulanier, Matthieu Reymond, Thomas Doualle, Cihan Koc, Julien Lumeau, Yves Pontillon, Laurent Gallais, Development of a spectral ellipsometer for the investigation of the optical properties of mono- and polycrystalline UO2, Optics Continuum, vol. 5, 2647-2665, 2026
[2] Matthieu Reymonda,b, Thomas Douallea,b, Jerome Sercombea, Mathilde Roccaa, Mehdi Nasselahsena, Christian Colina, Yves Pontillona and Laurent Gallaisb, High power laser heating of nuclear ceramics for the generation of controlled spatio-temporal gradients, J. Appl. Phys. 134, 033101 (2023)
[3] T. Doualle, V. Le Guillous, V. Klosek, C. Onofri-Marroncle, M. Reymond, L. Gallais, Y. Pontillon, ‘Development of UO2 thermal diffusivity measurement with laser techniques’, EPJ Web of Conferences 253, 07005 (2021)

Top