The subject falls within the scope of non-destructive testing of the electromagnetic properties of materials.
The aim is to upgrade an existing experimental device based on the use of a radiofrequency probe that extracts the magnetic permeability of the material covering an object from the measured reflection coefficient. Solving the direct problem using numerical simulations allows us to establish charts that are used to solve the inverse problem. The sensitivity to material properties, spatial resolution, and measurement uncertainties of the current device are limited by the antenna. Recent studies have demonstrated the value of using an electromagnetic jet-based probe for characterization with sub-wavelength resolution. Based on this work, the objective is to design and build a new probe that meets the desired performance requirements. The candidate will be responsible for the design and simulation work and then for monitoring the production of the prototypes. He/she will also be responsible for testing these prototypes on reference objects to demonstrate their advantages over the current solution. The new probe will then be integrated into the current measurement system and process
The postdoctoral research will proceed in three main stages. The first will consist of studying the principle of electromagnetic jet antennas and proposing a probe design suitable for the measurement method. Commercial simulation software will be used for the design, followed by internal codes for the validation of the selected prototype. The second stage will involve the manufacture of the prototype, followed by tests with reference samples to validate the concept. Finally, the probe will be integrated into the test bench and the calculation and extraction chain..