Nuclear energy, with low CO2 emissions, is one of the major players in France's energy transition. In this context, the management of the cooling of irradiated fuel elements is a matter of utmost importance. This thesis focuses on two-phase natural convection flows and vaporization phenomena that can develop in the cooling pools of various nuclear facilities, particularly those having a significant vertical variation in the saturation temperature of the coolant due to their great depth. These pools are used to dissipate the residual heat from irradiated fuels in many types of nuclear reactors, both existing and planned. In an accident scenario with a significant heat release from the fuels, the water in these pools can vaporize, eventually limiting their cooling capability. Among the possible phase change mechanisms in deep pools is the gravity-driven flashing, a phenomenon found in various natural or industrial systems analogous to vertical channels heated from below. However, this phenomenon has been little studied in the specific configuration of a pool and was only recently observed in this context. Therefore, the objective of this thesis is to better understand the phenomenon, as well as the turbulence induced within the coolant by the bubbles it generates, in order to improve state-of-the-art thermal-hydraulic models for simulating such pools. The proposed research, of an experimental nature, will be conducted in collaboration with the Catholic University of Louvain (UCLouvain, Belgium) and the LEGI laboratory of CNRS Grenoble, with a significant portion of the research carried out at UCLouvain. The candidate will be affiliated to the Core and Circuit Thermal-hydraulics Laboratory (LTHC) of CEA IRESNE, specialized in the study of two-phase flows in nuclear facilities. During the thesis, finely resolved experimental data in both space and time will be acquired and interpreted, contributing to a better understanding of the phenomenon. To achieve this, advanced techniques such as stereo particle image velocimetry (3D PIV) in two-phase media, thermometry and shadowgraphy will be employed. During this thesis project, the PhD student will be able to develop skills in the field of experimental thermal-hydraulics through the definition, execution, and interpretation of tests, as well as the use of advanced two-phase flow measurement techniques.